Danger: Before you begin to install this product, read the
safety information in Caution: Safety Information--Read This
First, SD21-0030. This booklet describes safe procedures for
cabling and plugging in electrical equipment.
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering the subject matter in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:
IBM Director of LicensingFor license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:
IBM World Trade Asia CorporationThe following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or program(s) described in this publication at any time without notice.
Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.
Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.
This information is for planning purposes only. The information herein is subject to change before the products described become available.
The following terms are trademarks of the IBM Corporation in the United
States or other countries or both:
| IBM |
| Alert on LAN |
| AIX |
| HelpCenter |
| Nways |
| Operating System/2 |
| OS/2 |
| Wake on LAN |
Tivoli and TME are trademarks of Tivoli Systems Inc. in the United States, other countries, or both.
Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.
Intel and LANDesk are trademarks of Intel Corporation in the United States, other countries, or both.
Other company, product and service names may be trademarks or service marks of others.
Danger: Before you begin to install this product, read the
safety information in Caution: Safety Information--Read This
First, SD21-0030. This booklet describes safe procedures for
cabling and plugging in electrical equipment.
Gevaar: Voordat u begint met de installatie van dit produkt,
moet u eerst de veiligheidsinstructies lezen in de brochure PAS OP!
Veiligheidsinstructies--Lees
dit eerst, SD21-0030. Hierin wordt beschreven hoe u electrische apparatuur op een
veilige manier moet bekabelen en aansluiten.
Perigo: Antes de começar a instalar este produto, leia as
informações de segurança contidas em Cuidado:
Informações
Sobre Segurança--Leia Isto Primeiro, SD21-0030. Esse folheto descreve procedimentos de segurança para a
instalação de cabos e conexões em equipamentos elétricos.
Fare! Før du installerer dette produkt, skal du læse
sikkerhedsforskrifterne i NB:
Sikkerhedsforskrifter--Læs dette først SD21-0030. Vejledningen beskriver
den fremgangsmåde, du skal bruge ved tilslutning af kabler og
udstyr.
Gevaar Voordat u begint met het installeren van dit produkt, dient
u eerst de veiligheidsrichtlijnen te lezen die zijn vermeld in de publikatie
Caution:
Safety Information - Read This First, SD21-0030. In dit boekje vindt u veilige procedures voor het
aansluiten van elektrische appratuur.
VAARA: Ennen kuin aloitat tämän tuotteen asennuksen,
lue julkaisussa Varoitus: Turvaohjeet--Lue tämä
ensin, SD21-0030, olevat turvaohjeet. Tässä kirjasessa on ohjeet
siitä, miten sähkölaitteet kaapeloidaan ja kytketään
turvallisesti.
Danger : Avant d'installer le présent produit,
consultez le livret Attention : Informations pour la sécurité
-- Lisez-moi d'abord, SD21-0030, qui décrit les procédures à respecter pour
effectuer les opérations de câblage et brancher les équipements
électriques en toute sécurité.
Vorsicht: Bevor mit der Installation des Produktes begonnen
wird, die Sicherheitshinweise in Achtung:
Sicherheitsinformationen--Bitte
zuerst lesen, IBM Form SD21-0030 lesen. Diese Veröffentlichung beschreibt die
Sicherheitsvorkehrungen für das Verkabeln und Anschließen elektrischer
Geräte.
Vigyázat: Mielôtt megkezdi a berendezés üzembe
helyezését, olvassa el a Caution: Safety Information--
Read This
First, SD21-0030 könyvecskében leírt biztonsági
információkat. Ez a könyv leírja, milyen biztonsági
intézkedéseket kell megtenni az elektromos berendezés
huzalozásakor illetve csatlakoztatásakor.
Pericolo: prima di iniziare l'installazione di questo
prodotto, leggere le informazioni relative alla sicurezza riportate
nell'opuscolo Attenzione:
Informazioni di sicurezza -- Prime informazioni da leggere in cui sono descritte le procedure per il cablaggio ed il collegamento di
apparecchiature elettriche.
Fare: Før du begynner å installere dette produktet,
må du lese sikkerhetsinformasjonen i Advarsel:
Sikkerhetsinformasjon --
Les dette først, SD21-0030 som beskriver sikkerhetsrutinene for kabling og tilkobling av
elektrisk utstyr.
Perigo: Antes de iniciar a instalação deste produto,
leia as informações de segurança Cuidado:
Informações de Segurança --
Leia Primeiro, SD21-0030. Este documento descreve como efectuar, de um modo seguro,
as ligações eléctricas dos equipamentos.
Peligro: Antes de empezar a instalar este producto, lea la
información de seguridad en Atención: Información de
Seguridad -- Lea
Esto Primero, SD21-0030. Este documento describe los procedimientos de seguridad
para cablear y enchufar equipos eléctricos.
Varning -- livsfara: Innan du börjar installera den
här produkten bör du läsa säkerhetsinformationen i dokumentet
Varning: Säkerhetsföreskrifter--
Läs detta först, SD21-0030. Där beskrivs hur du på ett säkert sätt ansluter
elektrisk utrustning.
This IBM product is made to high safety standards. It complies inherently with telecommunications safety standard BS 6301. It is not designed to provide protection from excessive voltages appearing externally at its interfaces. Therefore, when this product is connected to a public telecommunications network via any other equipment, and you connect to this product items not supplied by IBM United Kingdom Ltd., you must comply with mandatory telecommunications safety requirements.
This apparatus is approved under approval number NS/G/1234/J/100003 for indirect connections to the public telecommunications systems in the United Kingdom.
The following notices for STP media apply to the IBM 16/4 Token-Ring PCI Management Adapter (PN 34L5001) when using shielded twisted-pair cable media or when using unshielded twisted-pair cable and a shielded power cord.
IBM 16/4 Token-Ring PCI Management Adapter (PN 34L5001)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
International Business Machines Corporation
New Orchard Road
Armonk, NY 10504
Telephone: 1-919-543-2193
|
|
Tested to Comply With FCC Standards |
| FOR HOME OR OFFICE USE | |
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This product is in conformity with the protection requirements of EC Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-IBM option cards.
Properly shielded and grounded cables and connectors must be used in order to reduce the potential for causing interference to radio and TV communications and to other electrical or electronic equipment. IBM cannot accept responsibility for any interference caused by using other than recommended cables and connectors.
Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG vom 9. Nov. 92 das EG-Konformitätszeichen zu führen.
Der Aussteller der Konformitätserklärung ist die
IBM UK Ltd
PO Box 30
Spango Valley,
Greenock,
Scotland PA16 0AH.
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse B.
This product is a Class B Information Technology Equipment and conforms to the standards set by the Voluntary Control Council for Interference by Technology Equipment (VCCI). This product is aimed to be used in a domestic environment. When used near a radio or TV receiver, it may become the cause of radio interference. Read the instructions for correct handling.
In order to be compliant with FCC Class B, EN55022 Class B, and VCCI Class B emissions standards, as stated in Electronic Emission Notices for STP Media when using this adapter with UTP cabling, you MUST use a shielded power cord as described in "Power Cord Notices for UTP Media" to attach your PC to the AC outlet. Otherwise, the following statements apply for this adapter.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 or the FCC Rules. These limits are design to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
This product is in conformity with the protection requirements of EC Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-IBM option cards.
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Operation of this product in a domestic/residential environment may cause radio interference, which the user may be required to take measures to suppress.
Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von Geräten (EMVG) vom 30. August 1995 (bzw. der EMC EG Richlinie 89/336).
Dieses Gerät ist berechtigt in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen.
Verantwortlich für die Konformitätserklärung nach Paragraph 5 des EMVG ist die IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart.
Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2:
| Das Gerät erfüllt die Schutzanforderungen nach EN 50082-1 und EN 55022 Klasse A. |
EN 55022 Klasse A Geräte müssen mit folgendem Warnhinweis versehen werden: "Warnung: dies ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funkstörungen verursachen; in diesem Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen."
EN 50082-1 Hinweis: "Wird dieses Gerät in einer industriellen Umgebung betrieben (wie in EN 50082-2 festgelegt), dann kann es dabei eventuell gestört werden. In solch einem Fall ist der Abstand bzw. die Abschirmung zu der industriellen Störquelle zu vergrößern."
Anmerkung: Um die Einhaltung des EMVG sicherzustellen sind die Geräte, wie in den IBM Handbüchern angegeben, zu installieren und zu betreiben.
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.
When using the adapter in a Class B environment with UTP cable media, you must use a shielded power cord to attach your PC to the AC outlet in order to be Class B compliant.
Shielded power cords used in the United States and Canada are listed by Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA). Always purchase a shielded power cord with the UL or CSA rating located on the packaging or power cord itself. These shielded power cords are readily available at your local electronic distributors. IBM makes the shielded power cord PN 6952304 available through your IBM Marketing Representative for use at 115 volts in the United States and Canada. If purchasing other than the IBM PN, use a UL-listed or CSA-certified shielded power cord consisting of a minimum 18 AWG, type SVT or SJT, three-conductor line cord, a maximum of 15 feet in length, and a NEMA WD-1 5-15P type attachment plug rated at 15 amperes, 125 volts.
For PCs intended to be operated at 230 volts in the United States and Canada, use IBM shielded line cord PN 1838578, available through your IBM Marketing Representative or purchase a UL-listed or CSA-certified line cord consisting of a minimum 18 AWG, type SVT or SJT, three-conductor cord, a maximum or 15 feet in length, and a NEMA WD-1 6-15P type attachment plug rated at 15 amperes, 250 volts.
For all PCs intended to be operated at 230 volts outside the United States
and Canada, use the shielded line cord specific to your country as shown in
the following table. These shielded power cords are available through
your country IBM Marketing Representative.
Table 12. Power Cords Listed by Country
| IBM Power Cord Part Number | Used in These Countries |
|---|---|
| 13F9948 | Argentina, Australia, China (PRC), New Zealand, Papua New Guinea, Paraguay, Uruguay, Western Samoa |
| 13F9988 | Afghanistan, Algeria, Andorra, Angola, Austria, Belgium, Benin, Bulgaria, Burkina Faso, Burundi, Cameroon, Central African Rep., Chad, Chech Republic, Egypt, Finland, France, French Guiana, Germany, Greece, Guinea, Hungary, Iceland, Indonesia, Iran, Ivory Coast, Jordan, Lebanon, Luxembourg, Macau, Malagasy, Mali, Martinique, Mauritania, Mauritius, Monaco, Morocco, Mozambique, Netherlands, New Caledonia, Niger, Norway, Poland, Portugal, Romania, Senegal, Slovakia, Spain, Sudan, Sweden, Syria, Togo, Tunisia, Turkey, former USSR, Vietnam, former Yugoslavia, Zaire, Zimbabwe |
| 14F0006 | Denmark |
| 14F0024 | Bangladesh, Burma, Pakistan, South Africa, Sri Lanka |
| 14F0042 | Antigua, Bahrain, Brunei, Channel Islands, Cyprus, Dubai, Fiji, Ghana, Hong Kong, India, Iraq, Ireland, Kenya, Kuwait, Malawi, Malaysia, Malta, Nepal, Nigeria, Polynesia, Qatar, Sierra Leone, Singapore, Tanzania, Uganda, United Kingdom, Yemen, Zambia |
| 14F0060 | Liechtenstein, Switzerland |
| 14F0078 | Chile, Ethiopia, Italy, Libya, Somalia |
| 14F0096 | Israel |
| 1838578 | Thailand |
| 6952304 (115v usage)
| Bahamas, Barbados, Bermuda, Bolivia, Brazil, Canada, Cayman Islands, Colombia, Costa Rica, Dominican Republic, Ecuador, El Salvador, Guatemala, Guyana, Haiti, Honduras, Jamaica, Japan, Korea (South), Liberia, Mexico, Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, Saudi Arabia, Suriname, Taiwan, Trinidad (West Indies), United States of America, Venezuela |
IF YOU DOWNLOAD OR USE THIS PROGRAM YOU AGREE TO THESE TERMS.
International Business Machines Corporation grants you a license to use the Program only in the country where you acquired it and only for use with IBM Networking Products (IBM networking interface cards made Generally Available by IBM). The Program is copyrighted and licensed (not sold). We do not transfer title to the Program to you. You obtain no rights other than those granted you under this license.
Under this license, you may:
You must reproduce the copyright notice and any other legend of ownership on each copy or partial copy, of the Program.
You may NOT:
We do not warrant that the Program is free from claims by a third party of copyright, patent, trademark, trade secret, or any other intellectual property infringement.
Under no circumstances are we liable for any of the following:
Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.
We do not warrant uninterrupted or error free operation of the Program. We have no obligation to provide service, defect correction, or any maintenance for the Program. We have no obligation to supply any Program updates or enhancements to you even if such are or later become available.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.
You may terminate this license at any time. We may terminate this license if you fail to comply with any of its terms. In either event, you must destroy all your copies of the Program.
You are responsible for the payment of any taxes resulting from this license.
You may not sell, transfer, assign, or subcontract any of your rights or obligations under this license. Any attempt to do so is void.
Neither of us may bring a legal action more than two years after the cause of action arose.
If you acquired the Program in the United States, this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license is governed by the laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which you acquired the Program.
The following additional license terms apply to the Novell IntranetWare Client for DOS and Windows 3.1 code, included with IBM's LAN Client program. In the event of any inconsistency between the following terms and the terms of the IBM License Agreement for Productivity Aids, the following terms shall prevail.
IF YOU DOWNLOAD OR USE THIS PROGRAM YOU AGREE TO THESE TERMS.
The IBM program you have licensed may be designed to run in a single computer system only, or it may contain modules designed to run in multiple computer system environments. The type of environment that applies is limited by the definitions that follow:
SINGLE USER PROGRAM means a program which operates on an intelligent single-user device by which the device acts as a standalone system or a peer system on a Communications Network
COMMUNICATIONS NETWORK means a computer system which allows a number of independent computing devices to communicate with each other
NETWORK HOST OR NETWORK SERVER means a single machine on which a Host program or NLM or VAP operates to provide the host or server resources to the other machines in a network
HOST PROGRAM means that portion of the NetWare network operating system that executes on the Network Host or Network Server
CLIENT PROGRAM means that portion of the NetWare network operating system that executes on the personal workstation
NLM PROGRAM OR VAP PROGRAM means an application program that executes under control of the NetWare network operating system on the Network Host or Network Server
DOCUMENTATION means the manual(s) and other printed material packaged by IBM with the Program
If you have licensed a Host Program, an NLM Program or a VAP Program, and/or Client Program, you are authorized to 1) use one copy of the Host Program on a single Network Host or Network Server; 2) use a single copy of an NLM Program or a VAP Program on a single Network Host or Network Server; and 3) use the Client Program, and to, without additional charge, reproduce and use copies, subject to the limitation identified in the Program Document- ation, of the Client Program, in support of the Host Program
You must label, when recorded on portable media, Additional License Copies, Client Program Copies, copies made from them, and their documentation with the Program number, the copyright wording, and the copyright year as shown on the Program or documentation. The label of an Additional License Copy, a Client Program Copy, or a copy made from it must also include the words:
Licensed Material - Property of IBM IBM retains title to this copy and to any copy made from it. You may not transfer possession of this copy to any third party.
The label on documentation must also include the words:
Reprinted by permission of IBM.
|
| International Business Machines Corporation | Armonk, NY 10504 |
|
|
|
|
| The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you originally purchase for your use, and not for resale, from IBM or an IBM authorized reseller. The term "Machine" means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them. Machines are subject to these terms only if purchased in the United States or Puerto Rico, or Canada, and located in the country of purchase. If you have any questions, contact IBM or your reseller. |
|
Machine IBM 16/4 Token-Ring PCI Management Adapter Warranty Period* Lifetime *Elements and accessories are warranted for three months. Contact your place of purchase for warranty service information. |
| Production Status
|
|
Each Machine is manufactured from new parts, or new and serviceable used
parts (which perform like new parts). In some cases, the Machine may
not be new and may have been previously installed. Regardless of the
Machine's production status, IBM's warranty terms apply.
|
| The IBM Warranty
|
|
IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM's Official Published
Specifications. IBM calculates the expiration of the warranty period
from the Machine's Date of Installation. The date on your receipt
is the Date of Installation, unless IBM or your reseller informs you
otherwise.
|
|
During the warranty period, IBM or your reseller will provide warranty
service under the type of service designated for the Machine and will manage
and install engineering changes that apply to the Machine. IBM or your
reseller will specify the type of service.
|
|
For a feature, conversion, or upgrade, IBM or your reseller may require
that the Machine on which it is installed be 1) the designated,
serial-numbered Machine and 2) at an engineering-change level compatible with
the feature, conversion, or upgrade. Some of these transactions (called
"Net-Priced" transactions) may include additional parts and associated
replacement parts that are provided on an exchange basis. All removed
parts become the property of IBM and must be returned to IBM.
|
|
Replacement parts assume the remaining warranty of the parts they
replace.
|
|
If a Machine does not function as warranted during the warranty period, IBM in its sole discretion will repair, replace it (with a Machine that is at least functionally equivalent), or refund the purchase price. To obtain coverage under the warranty you may be required to present proof of purchase. This warranty is non-transferable by the end-user customer.
|
| Warranty Service
|
|
To obtain warranty service for the Machine, you should contact your
reseller or call IBM. In the United States, call IBM at
1-800-772-2227 In Canada, call IBM at
1-800-565-3344. You may be required to present proof of
purchase.
|
|
Depending on the Machine, the service may be 1) a "Repair" service at
your location (called "On-site") or at one of IBM's or a
reseller's service locations (called "Carry-in") or 2) an
"Exchange" service, either On-site or Carry-in.
|
|
When a type of service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property and the replacement becomes
yours. The replacement may not be new, but will be in good working
order and at least functionally equivalent to the item replaced.
|
|
It is your responsibility to:
|
| Extent of Warranty
|
|
IBM does not warrant uninterrupted or error-free operation of a
Machine.
|
|
Misuse, accident, modification, unsuitable physical or operating
environment, improper maintenance by you, or failure caused by a product for
which IBM is not responsible may void the warranties.
|
|
THESE WARRANTIES REPLACE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. HOWEVER, SOME LAWS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS
AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD.
NO WARRANTIES APPLY AFTER THAT PERIOD.
|
|
In Canada, warranties include both warranties and conditions.
|
|
Some jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you.
|
| Limitation of Liability
|
|
Circumstances may arise where, because of a default on IBM's part (including fundamental breach) or other liability (including negligence and misrepresentation), you are entitled to recover damages from IBM. In each such instance, regardless of the basis on which you are entitled to claim damages, IBM is liable only for:
|
|
Under no circumstances is IBM liable for any of the following:
|
|
Some jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply
to you.
|
|
This warranty gives you specific legal rights and you may also have other
rights which vary from jurisdiction to jurisdiction.
|
